Difference of Fiber patch cords and Coaxial Cable

Nov 16, 2018 Leave a message

With the further popularization of optical communication, optical communication products: optical fiber jumpers, fiber optic flanges, fiber optic terminal boxes, optical cable connectors and other optical accessories have gradually entered our lives.

Fiber patch cords are similar to coaxial cables except that there is no mesh shield. The center is the light-transmitting glass core. In a multimode fiber, the core has a diameter of 50 μm to 65 μm, which is roughly equivalent to the thickness of a human hair. The single mode fiber core has a diameter of 8 μm to 10 μm. The outside of the core is surrounded by a glass envelope having a lower index of refraction than the core to maintain the fiber within the core. Next to it is a thin plastic jacket to protect the envelope.

图片1

The fiber optic patch cord shall take corresponding measures according to the fire rating of the building and the fire resistance requirements of the materials. Fire-fighting cables and cables shall be used for laying cables or cables in flammable areas and building shafts; flame-retardant, low-smoke, low-toxic cables or cables shall be used in large public places; adjacent equipment rooms or junctions Flame-retardant wiring equipment should be used.

There are three main types of fiber jumpers according to the termination type: ST-ST, SC-SC, and ST-SC. There are two main types of single-mode fiber and multimode fiber according to the type of fiber. The specifications of the jumper length are 0.5m, 1m, 2m, 3m, 5m, 10m, etc. According to the outer sheath material of the cable, it can be divided into ordinary type, common flame retardant type, low smoke zero halogen type (LZSH), low smoke and halogen free flame retardant type.

Used in the fiber optic connection, in the equipment room is mainly used in the connection between the cable terminal and the blame. The connection between the device and the device. The line is mainly used for the handover of wiring (such as a fiber is placed in the city center by the telecommunications room) In the case of determining the user, the cable transfer box is now set up, and when the user is determined to lay the optical cable to the transfer box by the user, the advantage is to increase the core usage rate of the outgoing backbone communication cable).

The coaxial cable is made up of a core, insulation, shield, and housing. Because these parts have the same axis, this is called a coaxial cable. The main raw material of coaxial cable is made of copper, including the core, shielding, and the fiber jumper is made of quartz as the main raw material, so the cost of the coaxial cable is much higher than the fiber jumper.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry