As a transmission source, DVI fiber is used to access KVM devices. This is undoubtedly a kind of manipulation on computer software. This access method is to remotely control the port to access KVM or a computer. In this way, how does DVI fiber work through remote control software? It is preferred to visit the so-called "remote control".
The remote control software used in DP fiber is mainly used for pc management and service. The remote control software is a network-based, remote control of one or more computers by one computer (master/client) (controlled Application software on the host/server side. The program is generally divided into a control end and a controlled end. The office version is the same program used by the control end and the controlled end, and can be controlled by each other. In use, the client program sends a signal to the server-side program in the host computer to establish a special remote service, and then uses the remote service to send remote control commands using various remote control functions to control each of the controlled computers. An application running, as well as uploading and downloading files in the controlled computer, remotely controlling the on/off of the computer, etc., has a powerful intranet penetration function.
Its working principle is: the remote control software is generally divided into two parts: the client program (Client) and the server program (Server). Usually, the client program is installed on the computer of the host, and the server program is installed on the computer of the host. on. In use, the client program sends a signal to the server-side program in the host computer to establish a special remote service, and then uses the remote service to send remote control commands using various remote control functions to control each of the controlled computers. The application runs and manages the files of the controlled computer.