There has been a major event in the digital field of home appliances - the HDMI standard has undergone a huge upgrade. The HDMI Forum officially announced the HDMI 2.1 technical standard. The new standard targets the future video output direction, and supports lossless video with resolutions and refresh rates of 4K/120Hz, 8K/60Hz, 10K, and also supports dynamic HDR. Compared to HDMI 2.0, HDMI 2.1 has increased a lot in broadband, up to 48Gbps.
However, according to the standard implementation progress, even if the new version of HDMI 2.1 supports the transmission of 8K and 10K ultra-high-definition content, it will take time to popularize it. For ordinary users, the use of this high-profile product is still too far away. For the current and recent three or five years, the HDMI 2.0 version of the wire will still be the mainstream general specification.
Starte HDMI fiber optic cable (version 2.0a) uses special fiber as the transmission material, built-in top-level photoelectric conversion chip engine. Compared with the electrical signal propagation of copper wires, the use of optical signal transmission can achieve faster rates, longer transmissions and more complete signal transmission. The qualitative change of “core” is bound to bring about a new revolution in the field of transmission. The optical fiber HDMI line breaks the length bottleneck that traditional HDMI copper wire faces.
Since the copper wire is an electrical signal transmission, the longer the application distance is, the weaker the signal is. The optical fiber transmission medium of the Kaiboer fiber optic cable is used, and the signal transmission attenuation of the long distance can be neglected, completely eliminating the HDMI high-definition line using the traditional copper core. The long-distance transmission information has the disadvantage of large damage, and the longest transmission distance can reach more than 300m. It supports 4K 60hz to effectively transmit 4K audio and video signals, bringing the cinema-level visual feast to the users.
At the same time, thanks to the technologically advanced photoelectric conversion chip, the Starte HDMI cable is a rare type of wire that does not require additional power supply. In the past, optical fiber HDMI lines required long-distance signal transmission, and it was necessary to use an additional USB power supply or an intermediate carrier device to achieve long-distance use, which was extremely inconvenient and could only support conventional high-definition signal transmission.
In addition to its high-end audio and video and engineering applications, the Kyborg Fiber Optic HDMI cable is also a must for gamers. High-resolution, 3D games, etc. have very high requirements for video transmission bandwidth, especially 4K display devices that are gradually entering the eyes of ordinary consumers. To meet 4K 60Hz video transmission, the latest HDMI protocol is required to be perfectly supported, and the bandwidth requirement is even more It is much improved. Traditional HDMI copper cables are subject to signal attenuation and are difficult to meet the 18Gbps bandwidth transmission requirements. If you run the game forcibly, there will be a situation where the frame skipping is not smooth. This is unbearable for the ultimate enthusiast. With the Kaiboer HDMI cable, you don't have to worry about the transmission bandwidth. It can perfectly meet the 4K Ultra HD bandwidth transmission requirements. For a hearty gaming experience.