Most people have no choice when they are in contact with audio cables. They can only rely on commercial advertisements on the Internet to distinguish the quality of the wires. However, most of these advertisements are only for commercial purposes, which makes the newcomers have misunderstandings about the wire. Here we focus on the analysis of the advantages and disadvantages of the speaker cable, scientific analysis of the speaker cable, according to the nature of the wire technology, to understand the characteristics and problems of the wire and equipment adaptation, choose your suitable speaker cable.
I. Different materials have different sound expression
The purer the conductor material of the wire, the stronger the sound performance. A small experiment can be done, and the difference in sound expression can be easily heard by replacing the oxygen-free copper conductor in the existing speaker wire with a few ordinary copper wires or aluminum or iron wires. All wire conductors of different materials can provide different sound expression.
2. For each single material wire, the smaller the wire diameter, the more the number of strands, the worse the sound quality
This conclusion can also be confirmed by general experiments. The single-strand thickness and the analytical control of the sound quality are much higher than the multi-strand thin wires.
3. Even if there is only one impurity in the wire, it will have a serious impact on the sound quality.
Some manufacturers will apply a layer of high-copper solder on the surface of pure copper wire, which will immediately degrade the sound quality of the speaker cable. The reason why the wire material is continuously developed is to minimize the oxides and impurities in the metal material. The effect of sound quality, high fidelity, so the mixed material or coating material will make the speaker line sound quality greatly reduced.

4. Terminal joint material and wire material are equally important
Many people will ignore the connector material when purchasing the wire. The terminal connector makes the wire conductor and the device contact. The material of the terminal does not meet the requirements, which will not affect the sound quality and affect the sound quality, and even lead to poor contact, noise, and shorten the speaker cable. The service life is so important that the material of the terminal fittings of the speaker cable and the material structure of the wire are equally important. At present, good terminal fittings are made of non-magnetic copper. The higher the purity, the better the sound quality is. The brand that pursues higher sound quality will adopt the electroplating gold plating process. For example, the terminal of Akihabara speaker cable adopts 24K gold plating technology. The pure transmission of the sound is ensured, and the intelligent noise reduction effect is achieved, so that the sound is clearer, and the sound details are not lost even under the impact of a large signal.





