Starte Precision Electronics Co., Ltd., is specializing in the production of wire harnesses for many years. We have encountered many large and small production problems, then what problems will be encountered and What are the reasons for these problems? Let us discuss it.
1. How to control the terminal PIN when wearing the plastic case?
Each insertion of a hole must have a pullback action;
2. How to prevent the PVC shrank back when the wire is wetting?
Choose temperature-resistant PVC, and control the time of dipping tin in a short time;
3. What should I do if the tension is not reached after the wire harness is crimped?
If the tension is not reached, you can find the reasons from the following aspects: such as the crimping range of the wire conductor and the terminal; the material of the terminal; the material of the blade and its structural design.
4. What should I do if I don't stick when labeling?
When you first paste, do not touch the self-adhesive surface directly with your hands. When you stick it, stick it on a clean metal and stick it one by one.
5. How to do CABLE line reliability test?
Generally, hoisting, swaying, and conducting performance tests are required. The hoisting test conditions include: hoisting time, hoisting load, and displacement parameters after SR hoisting. The rocking test conditions include: angle, hoisting load, swaying frequency, minimum number of swaying requirements, and number of basic parameters of the breaking rate.
6. How to test the terminal plating for wire harness processing?
This is very simple, is to do the salt spray test of the terminal.
7. How to test the tension of the double-pressure terminal?
The double-pressure terminal is to test the tensile force of a single wire, and the test method is the same as the test method of the single wire.
