The SCSI terminator tells the SCSI host controller where the entire bus is terminated and sends a reflected signal to the controller. A termination signal must be made at both physical terminals to use the SCSI bus. The IDE interface is very easy to use, as long as the master and slave devices are set up, and the use of SCSI is cumbersome and requires a final setting to be used. The so-called end is to set a jumper on the last SCSI device or install a terminator to inform the SCSI controller that the SCSI bus is here.
SCSI Terminator is halt production, because the shrinking marketing and high MOQ of chip for manufacturing. You can still find some stock SCSI terminator in the world. Starte also have several type SCSI Terminator at hand.
Passive HPCN 50 male SCSI Terminator
Utra 320 HPDB 68 female SCSI Terminator
